Zooz
ZOOZ 800 SERIES Z-WAVE XS TEMPERATURE | HUMIDITY SENSOR ZSE44 800LREU
ZOOZ 800 SERIES Z-WAVE XS TEMPERATURE | HUMIDITY SENSOR ZSE44 800LREU
Couldn't load pickup availability
PRODUCT HIGHLIGHTS
-
Temperature sensor: track air temperature in the room of your choice to adjust your smart thermostat with more accuracy than ever.
- Humidity sensor: get notified if the humidity drops or rises above the set level and trigger your smart (de)humidifier to keep the climate of your sunroom or living room steady.
- Small and discreet: The simple and slim design helps blend the sensor with your interior for the invisible type of monitoring you'd expect from a modern sensor.
- Outside installation: Mount it on your covered porch or under the eve, just make sure to keep it away from direct rain and sun. The mounting bracket is now included with the device and recommended for outdoor installation.
- New 800 series Z-Wave chip: get more range, longer battery life, and quicker reports with the latest technology
- Powered by a single CR2450 battery
- S2 and SmartStart for extra security
- CHECK HUB COMPATIBILITY BEFORE BUYING (DOESN'T WORK WITH ALARM PANELS)
- Check out ZSE44 Frequently Asked Questions
NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product.
Z-WAVE FREQUENCY
- EU/UK: 868.42 MHz (used primarily in Europe)
HOW IT WORKS
This sensor is perfect for spot monitoring in spaces where your smart thermostat doesn't reach. Install the device in your bedroom to prepare just the right temperature for the night. Mount it in the basement or on your sun porch to trigger climate control device and keep the air constant where humidity and temperature is most likely to change quickly.
Just stick it to the flat surface of your choice with the supplied adhesive tape for 1-minute installation. We recommend using the dedicated mounting bracket if you'd like to install the sensor outdoors. Always keep the device out of direct sunlight and rain or snow.
WORKS WITH
- FIBARO
- eedomus
- Ezlo
- Home Assistant (Z-Wave JS)
- HomeSeer
- Homey (Zooz App for Homey)
- Hubitat (2.3.0 or higher)
- Jeedom
- OpenHAB
- Ring Alarm (temperature reports only)
- SmartThings Hub (register your product here to access the custom lua driver for advanced functionality)
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
Share


